Similar to Plain Dutch Weave, but woven in the twill style. Because adjacent shute wires are in tight contact with each other on both sides,
the density is two times that of the Plain Dutch Weave.
This type of weave provides the tightest and strongest wire cloth for separating purpose.
(In the case of Twilled Dutch Weave, the MESH count is represented by the number of shute wires in a lineal inch or 25.4 mm.)
Stainless steel, nickel, Monel metal, phosphor bronze, other metals
●In the case of Plain Dutch Weave, opening sizes are not accurate. Values shown below should be taken as just rough estimation.
| MESH | Wire Diameter | Estimated Diameter of Penetrating Particle | Thickness | Weight | |
| Warp×Shute | mm | µm | mm | kg/m2 | |
| 150 MESH | 20×150 | 0.45/0.35 | 138 | 1.12 | 6.6 |
| 200 MESH | 20×200 | 0.35/0.28 | 115 | 0.90 | 4.6 |
| 250 MESH | 20×250 | 0.25/0.21 | 87 | 0.67 | 3.5 |
| 30×250 | 0.25/0.21 | 85 | 0.67 | 3.3 | |
| 300 MESH | 30×300 | 0.26/0.19 | 77 | 0.65 | 3.4 |
| 360 MESH | 32×360 | 0.23/0.16 | 55 | 0.56 | 2.7 |
| 400 MESH | 40×400 | 0.19/0.135 | 58 | 0.48 | 2.2 |
| 500 MESH | 50×500 32×500 |
0.13/0.11 0.18/0.11 |
46 54 |
0.36 0.44 |
1.9 1.9 |
| 600 MESH | 60×600 | 0.13/0.09 | 38 | 0.33 | 1.55 |
| 80×600 | 0.12/0.09 | 35 | 0.32 | 1.7 | |
| 700 MESH | 80×700 | 0.1/0.065 | 32 | 0.26 | 1.4 |
| 800 MESH | 100×800 | 0.08/0.053 | 22 | 0.23 | 1.25 |
| 1000 MESH | 120×1000 | 0.065/0.053 | 20 | 0.18 | 1.0 |
| 1200 MESH | 150×1200 | 0.065/0.045 | 16 | 0.17 | 1.05 |
| 1400 MESH | 165×1400 | 0.065/0.04 | 15 | 0.14 | 0.77 |
| 200×1400 | 0.07/0.04 | 14 | 0.14 | 0.8 | |
| 1480 MESH | 165×1480 | 0.065/0.04 | 13 | 0.14 | 0.66 |
| 1550 MESH | 165×1550 | 0.065/0.035 | 13 | 0.14 | 0.66 |
| 2000 MESH | 200×2000 | 0.05/0.028 | 12 | 0.11 | 0.55 |
| 2300 MESH | 325×2300 | 0.035/0.025 | 5.0 | 0.085 | 0.40 |
| 2600 MESH | 350×2600 | 0.03/0.022 | 4.9 | 0.080 | 0.40 |
| 3000 MESH | 400×3000 | 0.03/0.018 | 4.5 | 0.06 | 0.34 |
| 3600 MESH | 510×3600 | 0.025/0.015 | 4.0 | 0.05 | 0.26 |