How To Stretch Welded Wire Fence [with a Fence Stretcher]

Have you been trying to put up a welded fence? Have you found it really difficult trying to make it stand strong? Well if you have been facing any of these you should know that you are not alone. Wire fences are difficult to install but in this article, you’re going to see easy ways to do it.

I had a friend ask me how I managed to put up all the fences I have on my farm, the answer is simple and though we have had to pay for it you’re going to be getting the effective methods to To Stretch Welded Wire Fence.

Wire fences have a lot of purposes, some people decide to use it for demarcation, always use it for making sure that their animals are in place, some others use it for decoration, whatever your reason is the most important thing that you want to do is to be able to install the wires.

5 Steps to Stretch Welded Wire Fence Effectively [fast]:

1. Setting the plans

Before you begin to do any job or any task at all especially one that is as important to your farm or property as security you must ensure that you are properly prepared for the task. In preparing your plans must come first after which you can move to implementation. You must make plans concerning the width the length and the height of your fence. Read Also: How To Stretch Woven Wire Fence

2. Taking measurements

This is the second most important task when you are installing a fence especially one which is welded. You want to make sure that the area of land that you are about to install your fence on is straight and not crooked. To do this you must first of all state your starting point, this is going to help you create a firm background and the stronghold for your fence.

3. The length of wire that you have

Before you begin to work at all you must make sure that you have the right amount of wire for the task. You don’t want to go halfway because that would greatly impede work. You might even need to fold everything back up again and start all over.

4. The posts

After setting up the initial starting pole, you want to make sure that you have several pills standing side-by-side around 7 210 feet apart. This is going to help you fence to gain some level of firmness. If you don’t want to have a fence that just folds back up on its own you must ensure that the fence posts are firmly placed inside the ground and not too far away from each other.

Continuing with the posts, you must ensure that all the posts are in a straight line, in order to achieve this you will need to tie a rope or a string on each and every one of the posts. This will help you easily see if there’s a crooked line. Read Also: Nails or Screws for Fence: which is more Preferred

5. Using a Welded Wire Fence Stretcher:

Finally when all that is done you must now begin to unroll the welded wire. In order to achieve the step, you will need what is called a wire stretcher. These wire stretchers come in different shapes and sizes. The size of our structure you choose will greatly depend upon the height of the fence that you’re trying to build.

6. How to stretch field fence on uneven ground

Stretching your field fence is the same thing as stretching any other offence at all. However, to be able to stretch it on uneven ground you will have to take one simple step. After you have installed the first post making sure that each one isn’t too far away from the other. you must give a gap between the ground and the wire base.

How do you do this? It is quite simple, you just have to lift the wire base a little bit above ground level. Make sure that before you do this you have measured the highest point of the uneven ground. If you do this it will help you easily tell the height above ground level that your wire base should be.

In conclusion, always remember that your fence will not be strong enough if you do not have firm fence posts. Also bear it in mind that in order for you to be able to stretch your welded wire fence, you will need the help of a pulling machine. Now a lot of people may decide to pull the wire with their bare hands. This is quite difficult and almost impossible to achieve.

 

Pro tip:

Pro tip: you should use a tractor or a rough terrain car, this will give you more balancing, more strength, and reduce the time spent. Moreover, with the help of Welded Wire Fence Stretcher, it’s easy to Stretch Welded Wire Fence in the effective method. [wiki resource]