+44 1234 56789 support@wiremeshfansa.com
Hexagonal wire netting is also known as chicken wire. This one galvanized after weaving(GAW) could last a long lifetime. After the wire is weaved to mesh, this fence run though a bath of molten zinc.This double galvanizing thoroughly seals the wire against rust and corrosion, especially in the twisted areas which tend to hold moisture.
GAW netting is ideal for gardens,any applications that requires a long lasting and strong lifetime.Comparing with galvanized before weaving hexagonal netting,GAW could reduce the frequency, inconvenience and high cost of replacement.
This wire is mainly used in the garden for bird protection. The mesh of 13mm hole is mainly used to make fruit cages and sculpture. The bigger one, 25-50mm mesh, is for poultry protection, garden borders and bird protection. And the mesh of 31mm-50mm hole is for rabbit cage.
GAW Hexagonal Wire Netting | |||||
Mesh | Min. Gal.v.G/ | Width | Wire Gauge(Diameter) BWG | ||
Inch | mm | Tolerance (mm) | SQ.M | ||
3/8’’ | 10mm | ±1.0 | 0.7mm-145 | 12”-36” | 27,26,25,24,23 |
1/2’’ | 13mm | ±1.5 | 0.7mm-95 | 12”-96” | 25,24,23,22,21 |
5/8’’ | 16mm | ±2.0 | 0.7mm-70 | 12”-96” | 27,26,25,24,23,22 |
3/4’’ | 20mm | ±3.0 | 0.7mm-55 | 12”-96” | 25,24,23,22,21,20,19 |
1’’ | 25mm | ±3.0 | 0.9m-55 | 12”-96” | 25,24,23,22,21,20,19,18 |
1-1/4’’ | 31mm | ±4.0 | 0.9mm-40 | 12”-96” | 23,22,21,20,19,18 |
1-1/2’’ | 40mm | ±5.0 | 1.0mm-45 | 12”-96” | 23,22,21,20,19,18 |
2’’ | 50mm | ±6.0 | 1.2mm-40 | 12”-96” | 23,22,21,20,19,18 |
2-1/2’’ | 65mm | ±7.0 | 1.0mm-30 | 12”-96” | 21,20,19,18 |
3’’ | 75mm | ±8.0 | 1.4mm-30 | 12”-96” | 20,19,18,17 |
4’’ | 100mm | ±8.0 | 1.6mm-30 | 12”-96” | 19,18,17,16 |
Note:1.)The above tolerance comply with standard EN 10223-2:1997.
2.)Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference. Also it is only for hot dipped Galvanized Netting. |
23 gauge
1/2″ x 1/2″ mesh
3/4” x 3/4” mesh
5/8” x 5/8” mesh
1″ x 1″ mesh
19 gauge
3/4” x 3/4” mesh
1″ x 1″ mesh
1-1/2” x 1-1/2” mesh
18 gauge
3/4” x 3/4” mesh
1″ x 1″ mesh
1-1/2” x 1-1/2” mesh
2” x 2” mesh
16 gauge
1″ x 1″ mesh
2” x 2” mesh