Four Wall Welded Wire Partition

A wire mesh security cage prevents pilferage, encloses work areas, and creates customized, accessible security areas in warehouses, manufacturing facilities, and distribution centers. It gives you control of who has access to valuable stock.

• Hardware is not accessible from the exterior.
• Double-tough construction provides unequaled strength and security.
• Installation is fast because the design uses fewer total parts.
• The panels are constructed of 10 gauge wires welded into 2" x 2" rectangular mesh and secured to a 1-1/4" x 1-1/4" steel angle frame on either side.
• Panels are connected to strong 2" x 2" x 14 gauge tubular steel posts.
• Listed dimensions reflect exterior size; enclosed dimensions are slightly smaller.
• Standard footplates are 2" x 7". They extend outside the post by 2½” per corner post position depending on footplate orientation. They will slightly increase overall dimensions.
• If you are in a seismic zone, or your floor is not smooth or even, a larger footplate may be required.
• If overall dimensions are extremely critical to your project, contact us for assistance. We can calculate the precise size of your enclosure in advance.
• Finish: Gray powder coat.

Installation: Because of it's modular design and fastening system, welded wire partitions can be installed in less time that similar woven wire partitioning. It's also extremely versatile if having to make alterations or modifications in the field. Sometimes obstructions such as piping or other permanent structures can get in the way of where you need to place the partition. Because each wire connection on the panel is welded, you can cut holes in the panel to accommodate for the obstruction without losing the structural integrity of the panel without having to re-weld. You can't do that with woven wire! Gate: The 4' wide wire mesh sliding gate extends to the full cage height. Enclosure ships with two doorposts, trolley trucks, key lock, 16-gauge tracks, and all hardware. The gate is constructed to work on the left or right hand side, inside or outside of the enclosure. 4-sided structure: Four-wall wire enclosure unit is freestanding and can be utilized anywhere in a facility to provide a secure enclosure. You can place them virtually anywhere that has a suitable floor and space. Cages have a 3-1/4" sweep space between the panel bottom and the floor. If you need assistance, please contact us. Important note: Your facility wall must be able to accommodate wall or ceiling panels to utilize this model. At-wall post connections may be required in some circumstances. Posts at the wall are recommended for dry wall, gypsum, or metal walls. Panels may connect directly to masonry, block, and some wood walls.