Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

EZ WIRE® MESH SECURITY ROOMS
WITH 5' SLIDE DOOR

"no nuts and bolts"

For Your Security Area - complete low cost wire mesh
security room can be purchased without figuring your own
bill of material on what you may need. All doors are
supplied with cylinder locks.

CONSTRUCTION:
* 1 1/2" diamond mesh #10 ga. wire.
* 1 1/4" x 5/8" channel frame.
* Choose 5' wide swing door.
* Choose 2, 3, or 4 sided room.
* Choose 8' or 10' high partition.
* Specifications and features are listed
   below price tables
* Available with or without ceiling.

Shown with Swing Door
Standard Model Supplied with 5' Slide door

PATENTED HOOK FASTENER
Value Safe & Secure
The patented hook fastener
slips in easily and locks se-
curely into a 2-1/2" sq. post.
Once secured, the internal clip
is much more secure than a
standard bolted connection,
which may be accessed from
the outside. The hook fastener
is not visible or accessible from
the outside. The diamond wire
weave provides a built-in dia-
gonal brace for added strength
and security.
The complete EZ WIRE
system is easy to install,
rearrange or expand in
plant or warehouse areas
and in other commercial,
industrial and institutional
applications. With a variety
of sizes, styles and options
available, the EZ WIRE
non-progressive panel
system is the best value
in the industry.
STEP 2: Hammer Drive
Pin for a Secure connection.
STEP 1: Align Hooks
and Insert into slots.


3 SIDED WITHOUT CEILINGS

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


WITHOUT CEILING
  2 SIDES 3 SIDES 4 SIDES
W L H MODEL WT. PRICE MODEL WT. PRICE MODEL WT. PRICE
10 10 10 102220 287
$2,096.10
103220 413
$2,792.30
104220 549
$3,495.60
20 10 10 102240 423
$2,868.80
103240 549
$3,565.00
104240 821
$5,041.10
20 15 10 102340 481
$3,325.50
103340 705
$4,478.50
104340 977
$5,954.50
20 20 10 102440 539
$3,782.30
103440 821
$5,110.50
104440 1093
$6,586.50
30 20 10 102460 655
$4,554.90
103460 957
$5,883.10
104460 1365
$8,131.90
10 10 8 82220 248
$1,812.40
83220 354
$2,374.50
84220 468
$2,947.40
20 10 8 82240 361
$2,429.60
83240 467
$2,991.50
84240 694
$4,181.60
20 15 8 82340 425
$2,793.90
83340 595
$3,720.40
84340 822
$4,910.40
20 20 8 82440 489
$3,158.30
83440 693
$4,225.80
84440 920
$5,415.90
30 20 8 82460 602
$3,775.30
83460 806
$4,848.60
84460 1146
$6,714.80
WITH CEILING
 
2 SIDES
3 SIDES
4 SIDES
W L H MODEL WT. PRICE MODEL WT. PRICE MODEL WT. PRICE
10 10 10 102221 355
$2,891.50
103221 539
$3,506.00
104221 665
$4,127.50
20 10 10 102241 471
$4,237.10
103241 781
$4,851.50
104241 1013
$6,023.10
20 15 10 102341 905
$5,920.10
103341 1099
$6,768.80
104341 1331
$7,940.40
20 20 10 102441 1107
$6,937.60
103441 1359
$8,102.20
104441 1591
$9,273.90
30 20 10 102461 1339
$9,390.80
103461 1707
$10,473.60
104461 2169
$12,277.30
10 10 8 82221 374
$2,607.90
83221 480
$3,103.50
84221 584
$3,579.30
20 10 8 82241 608
$3,827.00
83241 704
$4,307.10
84241 869
$5,221.80
20 15 8 82341 869
$5,393.60
83341 1004
$6,044.90
84341 1196
$6,959.70
20 20 8 82441 1062
$6,329.30
83441 1246
$7,233.10
84441 1438
$8,148.00
30 20 8 82461 1402
$8,655.90
83461 1700
$9,559.80
84461 1980
$10,898.20

FEATURES
Patented hook design slips
in easily and locks into place
securely.
Aluminum drive pin is tapped
into place for permanent
installation, which can be
accessed from the inside only.
Diamond Wire Weave
A 1-1/2" diamond wire
weave is standard in
each EZ Wire partition,
door and window.
Diagonal Bracing is not
needed.
Clinched Wire
All woven wire is
clinched - not welded
- into partition frames.
This technique insures
greater strength and
enhanced appearance.
2-1/2" Tubular Posts
16 gauge 2-1/2" sq.
tubular posts yield
double the strength
of 2" sq. tubing.
Ceilings
Perimeter support members
are attached to the partition
using self-threading screws.
Ceiling panels are attached
without bolts. 2-1/2" tubing
is attached between rows
of ceiling panels.
Corner Post
EZ Wire corner posts create
smooth, 90° turns in partitio-
ning. Partitions attach to the
inside for added security.
"C" Type Frame Bars
Both sides of these frame
bars have a smooth finish
with no rough, unsightly
welds. Hook fastener is
not visible nor accessible
from the outside.
Over Channel
Used to securely
seat together upper
panels to lower
panels - eliminating
the need for bolting
horizontally.

HINGED DOOR AND SLIDING DOORS

EZ Wire® hinged doors
are functional and secure
with heavy duty hinges
EZ Wire® sliding doors may slide
left or right and may be mounted
either inside or outside of the partitioning.
Lock Options
All doors have a bronze cylinder
lock or a padlock attachment. Other
optional locks include electric strikes,
magnetic locks, card readers, hydraulic
closers, keypad/pushbuttons, proximity
locks, panic bars and interlocks.
Single Swing Door Single Sliding Door
Available in widths of 3 and 4 feet
with a height of 7 feet. If installed
in a partition higher than 7 feet,
a transom panel is included to
fill the space above the door.
Full height single sliding doors
are available for the full height
of stock partitions. Doors 6'
or wider are shipped
"knocked down" in 2
sections.
DOOR DETAILS
Hinged Lock
Heavy duty hinge features
permanently installed pin
swaged at both ends for
added security.
All doors have a bronze
cylinder lock or a padlock
attachment.
Latch Receiver &
Bottom Slam
Latch Receiver & Bottom
Slam mount directly onto
post for security and
convenience.
Overhead Bracket
Bracket secures overhead
track for single or double
sliding doors.
4-Wheel Trolley
Trolley permits balanced
movement and smooth operation.
Door Guide
Door guide is lagged securely to floor
for continuous alignment.
Standard Door Lock Standard Door Lock
Key Operated -
5 pin mortise cylinder
Reverse side -
standard hex knob.
Key options:
• Keyed different - standard
• Keyed alike - optional
• Keyed different/master
   keyed - optional
Reverse side -
optional lever
handle

SPECIFICATIONS
PANELS CORNER POSTS
Stock panels are manufactured in even widths of 1 ft -
10 ft and in heights of 1 ft. - 5 ft.. The panels are installed
stacking one panel over another using special welded
connectors on each panel. The horizontal connection
between panels is accomplished without bolting by over-
lapping the lower panel's upper framing channel with the
upper panel's attached overchannel.
Special tubular corner posts are fabricated from 14 gauge
steel. The length of the post will equal the overall height of
the assembled partitions. Slots are punched in the corner
posts to allow boltless installation. Other holes are
provided for use with doors which are attached using
self threading screws. Posts have pads welded to one
end for attachment to the floor.
Each panel is attached to tubular lines posts without bolts
using connectors accessible from the inside of the en-
closure only. Each panel has connectors welded to the
vertical framing members which engage slots punched in
the line posts.
LINE POSTS
2 1/2" square x 14 gauge posts are universally punched
with slots and holes for mounting all types of panels
and doors.
DOOR CONSTRUCTION
FRAME
Doors are constructed of similar materials to match the
panels. Door frames are covered with rolled steel
channels where necessary.
Vertical and horizontal members are 1 1/4" x 5/8" x
14 gauge "c" channels with uniformly spaced holes for
inserting woven wire. Vertical and horizontal members
are mortised and tenoned at corners.
Each sliding door has (two) four wheel adjustable trolleys
traveling in an enclosed overhead track. The door bottom
is guided by a U-shaped floor guide.
WIRE MESH
Wire mesh is made of 10 gauge triple crimped wire and
is securely clinched into the vertical and horizontal frames.
Wire is woven into a 1 1/2" pattern with the wires
intersecting the channel frames at a 45 degree angle.
Each hinged door has 3 fixed butt hinges and a jamb bar.
LOCKS
Each door is shipped with a bronze cylinder lock. The
lock contains a 5-pin cylinder (1" standard) which may
be master-keyed and keyed alike.
SWEEP SPACE
A padlock attachment is also available.
There is a 3 1/2" sweep space between the bottom
horizontal bar and floor level.
EXTRA PARTITIONING HEIGHT
Installations requiring heights up to 40' may be assembled
by stacking partitions. 2-1/2" square tubing posts are in-
stalled between the partitions to join them together from
floor to ceiling. A 2-1/2" x 7-1/2" pad is welded to the
post for lagging to the floor. Bracing against ceiling joists,
building columns or other means is required for installations
over 20'.
FINISH
Panels, doors and line posts are painted with one coat of
high gloss machinery enamel. Some hardware items may
be zinc plated.
HARDWARE
Hardware (including masonary lag bolts)
required for installation are included.
Installations in excess of 40 ft. in height and those where
overhead bracing is not possible may require special
design.
OVERCHANNEL
1 1/2" x 11/16" x 14 gauge channel is attached to one
horizontal framing member of each panel. This channel
is attached using self tapping screws and the opening of
the channel faces out. These channels may be demounted
if necessary.
EZ Wire Partition System, Security Cages, Security Wire Partition, Welded Wire Partitions, Wire Mesh Cages, Wire Mesh Partition, Wire Partition, Wire Partitions, Wire Security Cage, Wire Security Partitions, Woven Wire Partition, Woven Wire Partitions,
and Woven Wire Enclosure from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart