Suprete offers reinforcing concrete mesh. We cooperate with wholesale and construction companies, owners of farms and suburban areas.
Welded mesh reinforcement bars are from 3 to 40 mm diameter, located in mutually perpendicular direction and forming a square or rectangular shape mesh. Reinforcing mesh opening size ranging from 50 mm to 250 mm. Distinguish heavy reinforcing mesh (diameter rods of 12 mm and above) and light meshes (the diameter of the rods from 3 mm to 12 mm).
When choosing a wire mesh, material, mesh sheet size, mesh opening, and the purpose must be taken into account. For example, if you need concrete mesh for plastering, the thin wire mesh is suitable.
Suprete concrete reinforcing mesh specification:
Mesh reinforcement for the foundation
Mesh reinforcement for the foundation, In the civil and industrial construction special attention and increased demands placed on the quality of the foundation, because it depends on the operational safety and durability of structures.
Masonry reinforcement mesh
Masonry reinforcement mesh – the most popular type of wire mesh. It is referred to the building grid and used as a reinforcing element in the construction of reinforced concrete and masonry buildings. Masonry reinforcement mesh increases the strength of the structure and quality of plastering work. For the manufacture of masonry reinforcement wire mesh used steel wire diameter of 3 to 5 mm. The mesh size ranges from 50 mm to 250 mm.
Mesh reinforcement for the floor
Mesh reinforcement for the floor. This mesh is packaged in roll form. It is very convenient for delivery, because the diameter of the wire used is relatively small. The length of such a mesh size not more than two meters, which facilitates its transportation.
Reinforcement mesh used in road works
Reinforcement mesh used in road works to strengthen the road surface. This mesh is made from stainless steel with diameter of 3 mm, 4 mm, or 5 mm. Its composition with low carbon content allows qualitatively strengthen road terrain. The reinforcing road mesh is the most cost-effective option for construction and repair of roads, bridges, and large industrial plants. Usually, road mesh opening in sizes 50 × 50 mm, 100 × 100 mm, 125 × 125 mm, 150 × 150 mm. Its sheet sizes may be 1.5 × 2 m, 2 × 3 m, 2 × 6 m.
Trench mesh
Trench mesh is long, narrow sheets of concrete reinforcing mesh, ideally sizes for trenches, paths or other narrow spaces. Its longitudinal wires (main wire) from 7.6 mm up to 15.6 mm diameter, and cross wire in 4 mm or 4.77 mm diameter. Trench rib mesh all comes 6.0 m length.
Brick wall reinforced mesh
Brick wall reinforced mesh also named concrete slab mesh is a kind of welded wire mesh panel for reinforced concrete uses. It covers truss mesh reinforcement and ladder mesh reinforcement.
Bridge concrete reinforced mesh is used in bridge construction reinforcement, like bridge girders, bridge spans, bridge decks, and many other applications.
Square reinforcing mesh from superior quality ribbed steel rebar welded in 100 mm or 200 mm mesh opening, used in bridges, highway and wall reinforcement.
Rectangular reinforcing mesh reinforces thin concrete elements such as floor slabs and walls where more strength is required in one direction than the other.
Concrete reinforcing mesh welded from 3 to 40 mm steel rods used for concrete footpaths and ground slabs construction, in galvanized and stainless steel materials.
In addition to above mentioned reinforcement concrete mesh, reinforcing deformed bar and smooth bar, steel bar chair, beam bolster, slab bolster, rebar supports and rebar tie wire, prefabricated round or square shaped cages are also in our company manufacture range.
Typical dimensions of the welded mesh reinforcement sheet are the following values: 6.0 m × 2.4 m, 4.8 m × 2.4 m, 3.6 m × 2 m, 2 m × 4 m. But we also can produce mesh with different sheet sizes and different mesh opening size depending on the customers' wishes. Delivery usually made in sheet, but also can be delivered in rolls.
The cost of reinforcing concrete mesh depends on the mesh size, the wire diameter and the type of coating. To find out the price for the products just mail to samuel@enzarindustry.com. Managers will provide you with all the information you need on the availability and cost.
Welded wire mesh reinforcement includes top precast unit reinforcement and bottom precast unit reinforcement, length form 2640 to 5505 mm.
continue readingCommon nail and BWG21 galvanized wires, common nails, 16kg/carton and 16kg/box, BWG21 galvanized wire, 3kg/roll, bundle coil 5/roll.
continue readingConcrete reinforcing mesh for building slabs and floors in hardware works, column suitable for making beams, braces, columns, walls and locking walls.
continue readingI bought ten bunches of pre-cut black tie wire for steel bars fixing. The wire has a high tensile strength and it's not easy to break.
Tom Johnson
Phoenix
Several years ago, I accepted my friend's advice, so I used galvanized ladder mesh in the stone wall construction to increase elasticity and performance. Now, thanks for my friend, the ladder mesh has no rust and the wall has no crack at all.
Peter Brown
Baltimore
I bought welded reinforcing mesh for road reinforcement to prevent cracks. Now the surface of the road is still flat and has no crack. It's great!
Adam Davis
Fort Worth
I'm a contractor of the construction team, and to satisfy customer's strong demand, I bought the masonry mesh for reinforcement when pouring ceilings, and foundations. Until now, it has been ten years, and my customer often said to me that his house was better than his neighbor's because his house didn't leak. Thanks for the masonry mesh.
John Wilson
Chicago