Chain Link Fencing
A chain-link fence or wire netting or chain-wire fence is a type of woven fence usually made from galvanized or LLDPE-coated steel wire. The wires run vertically and are bent into a zig-zag pattern so that each “zig” hooks with the wire immediately on one side and each “zag” with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence.
Fencing usually comes in 20 rod and 50 ft rolls which can be joined by “unscrewing” one of the end wires and then “screwing” it back in so that it hooks both pieces. Common heights include 3 ft, 3 ft 6 in, 4 ft, 5 ft, 6 ft, 7 ft, 8 ft, 10 ft, and 12 ft, though almost any height is possible. Common mesh gauges are 9, 11, and 11.5. For tennis courts and ball parks the most popular height is 9 ft (2.75 m).
The popularity of Chain link fence is due to its relatively low cost and ease of installation. A further advantage is that due to the open weave, chain-link fences are transparent, and do not obscure sunlight from either side of the fence. If a semi-opaque fence is desired, this can be achieved by the insertion of slats into the mesh.
Available in 2.00 mm to 4.00 mm of Gi Wire 40 to 270 GSM ZINC COATING.
Made from prime QUALITY HOT DIP GALVANIZED WIRE as per IS Specifications
Sizes & Specification
|GI Wire Thickness||Aperture (pitch)||Width||Length||We manufacture & supply according to CUSTOMER NEEDS & SPECIFICATIONS
Also, available in PVC COATED Wire
|2.00 mm||50 mm to 100 mm||Upto 3 Mtrs.||Upto 30 Mtrs.|
|2.50 mm||50 mm to 100 mm||Upto 3 Mtrs.||Upto 30 Mtrs.|
|3.00 mm||50 mm to 100 mm||Upto 3 Mtrs.||Upto 30 Mtrs.|
|4.00 mm||50 mm to 100 mm||Upto 3 Mtrs.||Upto 30 Mtrs.|