Pole Line Hardware (5)

First page 1 Next page Last page

5-1

POLE LINE HARDWARE

Warranty - Material Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from defects in material and workman- ship. Buyer must notify the Company promptly of any claim under this warranty. The Buyer’s exclusive remedy for breach of this warranty shall be the repair or replacement, F.O.B. factory, at the Company’s option, of any product defective under the warranty which is returned to the Company within one year from the date of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR ARISING BY OPERATION OF LAW, COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE IMPLIED, SHALL EXIST IN CONNECTION WITH THE COMPANY’S PRODUCTS OR ANY SALE OR USE THEREOF. The Company shall in no event be liable for any loss of profits or any consequential or special damages incurred by Buyer. The Company’s warranty shall run only to the first Buyer of a product from the Company, from the Company’s distributor, or from an original equipment manufacturer reselling the Company’s product, and is non-assignable and non-transferable and shall be of no force and effect if asserted by any person other than such first Buyer. This warranty applies only to the use of the product as intended by Seller and does not cover any misapplica- tion or misuse of said product. Warranty - Application Hubbell Power Systems, Inc. does not warrant the accuracy of and results from product or system performance recommendations resulting from any engineering analysis or study. This applies regardless of whether a charge is made for the recommendation, or if it is provided free of charge.

Responsibility for selection of the proper product or application rests solely with the purchaser. In the event of errors or inaccuracies determined to be caused by Hubbell Power Systems, Inc., its liability will be limited to the re-performance of any such analysis or study.

HUBBELL ® Power Systems © Copyright 2017 Hubbell Incorporated  •  210 North Allen Street  •  Centralia, MO 65240 USA www.hubbellpowersystems.com E-mail: hpsliterature@hubbell.com NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. Printed in USA NOTICE: For latest revision of our Catalog and Literature, please visit our web site: www.hubbellpowersystems.com CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-2

NOTE: Where applicable, pole line hardware man- ufactured by Hubbell Power Systems, Inc. is made from steel produced in accordance with ASTM A575 and/or ASTM A576. Where galvanized, items are galvanized in accordance with ASTM A153. Where appropriate, these pole line hard- ware items meet or exceed the following ANSI/NEMA specifications:

ANSI C135.4 C135.1 C135.2 C135.22 C135.14 C135.17 C135.7 C135.5

NEMA PH1

PH10 PH38 PH20 PH25

Refer to this Catalog Section 5 or call your Hubbell representative for conformance of particular items to the above specifications.

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-3

ADAPTER, THIMBLE Used to change 1-inch pin insulator thread to 1 3 / 8 -inch pin insulator thread.

Dimensions in Inches

Approx. Ship Weight, Lbs. Per 100 Pcs. 63

Catalog No. 4257

Exterior Thread Dia. 1 3 / 8 inch

Interior Thread Dia. 1 inch

Overall Length 2 1 / 4

No. 4257

ARMS, CABLE EXTENSION For suspending cables at a distance from the pole, a No. 7903 Cable Suspension Clamp is usually used under the arm (See page 5-21), attached through the center slot to a 5 / 8 " machine bolt with a washer under the bolt head. Cable extension from the pole is 23" for No. 7920, 41" for No. 7921. Cable clamp with attachment bolt and pole mounting bolts, or lag screws, must be ordered separately. Hot dip galvanized.

3 / 4 " Dia. Holes

7 1 / 2 "

A-Size Angles B

Approx. Ship Weight, Lbs. Per 100 Pcs.

Dimensions in Inches

Catalog No.

A — Angle Size 3 x 2 1 / 2 x 1 / 4 3 1 / 2 x 2 1 / 2 x 5 / 16

B 8 1 / 2 18 3 / 4

C 26 44 1 / 2

7920 7921

2900 6200

No. 7920

BANDS, POLE, ACCESSORIES For use with No. 6276 and No. 6277 Pole Bands (See next page). Deadend clevis has 13 / 16 " hole to match rectangular holes in bands, and is attached with cone head bolt. Guy clips made in two pieces: top, 5 / 16 " x 2 1 / 2 " steel; bottom, 3 / 16 " x 2 1 /2 " steel. A 3 / 4 " x 2 1 / 2 " machine bolt with cotter pin fastens thimble. Guy clip also includes one No. 6280 conehead bolt which has square shoulder. Sheave can be used with C2030183 on page 5-4.

No. PS6280

Catalog No. 6278 PS6280 451016P

Steel Size Inches — A See above 3 / 4 x 2 1 / 2

Approx. Ship Wt. Lbs. Per 100 Pcs.

Description

Guy Clip Cone Head Bolt Sheave for Guy Clip

580 50 245

No. 6278

.81" dia.

P451016

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-4

BANDS, POLE, ADJUSTABLE Heavy Style

These are 3 / 16 " x 4" flat steel bands, shipped assembled with one 3 / 4 x 4" curved bolt and one 3 / 4 x 2 1 /2 " cone head bolt. Hot dip galvanized. Extra cone head bolts, for attaching deadend clevises and guy clips, must be ordered separately. (SeeAccessories on page 5-3). One to eight attachments can be made from each pole band.

No. 6277

Catalog No. † 6276 † 6277

Approx. Ship Wt. Lbs. Per 100 Pieces

Description Band, 6" - 10" Band, 8" - 14"

950 1150

†RUS Listed

BANDS, POLE, ADJUSTABLE Use steel Pole Bands on wood poles. Take-offs for guy and insulation attachments can be made by using connecting links (see below). Bands are shipped unassembled.

C2050140 or C2050141

Approx. Ship Wt. Per 100 Pcs.

Cat. No. (Complete Assembly) C2030194 C2030197 C2030200

Lag Hole Size 9 / 16 " 9 / 16 " 9 / 16 "

Pole Dia.

Size Stud

Size Steel

Type 4 Way, 90° 4 Way, 90° 4 Way, 90°

C2031087

C2030141

C2030140

C2031088

C2030187

4 Pcs.

4 Pcs. 4 Pcs.

1560 2360 2820

6" - 11 1 / 2 " 9 1 / 2 " - 14" 9 1 / 2 " - 16"

3 / 4 x 6" 3 / 4 x 6" 3 / 4 x 8"

1 / 4 x 4" 1 / 4 x 4" 1 / 4 x 4"

4 Pcs. 4 Pcs.

4 Pcs.

1 / 4 " thick

7 1 / 2 "

1 1 / 4 " Dia.

15 / 16 " Dia.

No.

C2030183

BANDS, POLE, CONNECTING LINKS Designed for use with 4-WayAdjustable Pole Bands, above. For insula- tor or guy attachments. C2030183 has 1 1 / 4 " diameter hole on one end and 15 / 16 " holes on the other end.

Length, Inches (Center Hole to Center Hole) 7 1 / 2

Catalog No.

Approx. Ship Wt. Lbs. Per 100 Pieces 360

Steel Size Inches 1 / 4 x 3

(Per Pair) C2030183

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-5

BANDS, POLE, SECONDARY RACK For attaching secondary racks to tubular metal poles. Bands are equipped with 5 / 8 " x 2" carriage bolts for attaching the racks, and 1 / 2 " x 1 5 / 8 " oval-shoulder clamp bolts for tightening bands on pole. Hot dip galvanized 1 /4 " x 1 1 / 2 " steel. Made in two styles, the single type for at- taching one rack and the double type for two racks.

PS6366 Single Type

Double Type

Single Type

Approx. Ship Wt. Lbs. Per 100 Pcs.

Dim. in Inches

PS6376 Double Type

Cat. No. 636412 PS6366 PS6367 PS6368

Pole O.D. 5

Cat. No. 637412 PS6376 PS6377 PS6378

Pole O.D. 5

304 368 406 480

388 380 475 524

6 5 / 8 7 5 / 8 8 5 / 8

BAYONETS, GROUND WIRE (Supports, Shield Wire)

For supporting overhead ground wire on wood or steel poles. Bayonets have an 11 / 16 " hole andan 11 / 16 " pole-mounting slot to allowfor inaccuracy in boring holes. Holes at top of bayonet allow use of No. 5450 ground- wire clamps (Not included. See page 5-20). Bolts used to fasten corner bayonets together are included. Pole-mounting bolts and ground-wire clamps are not included. Hot dip galvanized.

Approx. Ship Wt. Lbs. Per 100 Pieces

Dimensions in Inches

Catalog No.

Angle Size

Straight Bayonets

940 2200 3430

2 x 2 x 1 / 4 2 1 / 2 x 2 1 / 2 x 1 / 4 3 x 3 x 1 / 4

5436 5466 PS5484

36 66 84

10 15 20

5466

BOLTS, CARRIAGE Carriage Bolts have square nuts, finished points and rolled threads. Standard heads have square shoulders. Open-hearth steel. Hot dip galvanized.

Approx. Ship Wt. Lbs. Per 100 Pcs.

Dim. in Inches

Cat. No.

Bolt Length

Cat. No.

Thread Length

Bolt Length

Thread Length

3 / 8 -Inch Diameter

5 5 1 / 2 1 / 2 -Inch Diameter 3 3 3 4 6 7

15.6 17 17.6 21.6 22 †*8634 †*863412 †*8635 †8636 8637 4,250 Pound Rated Tensile Strength *NEMA Standard †RUS Listed 4 4 1 / 2 5 6 7 1 3 / 4 1 3 / 4 1 3 / 4 1 3 / 4 1 3 / 4

†*8645 †864512 †*8646 8647

31 37.5

38 44

No. 8634

7,800 Pound Rated Tensile Strength

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-6

BOLTS, CLEVIS For supporting crossarm suspension insulator strings. Cotter bolt is 2 3 / 4 " long and comes with cotter pin and hex nut. Clevis Bolts are drop-forged steel. Hot dip galvanized. Dimensions in Inches Approx. Ship Wt. Lbs. Per 100 Pcs. Thread Length Catalog No.

E 1 13 / 16 1 13 / 16 1 13 / 16 1 13 / 16 1 13 / 16 1 13 / 16 1 13 / 16 1 13 / 16

A   8 10 12 14   8 10 12 14

C 13 / 16 13 / 16 13 / 16 13 / 16 13 / 16 13 / 16 13 / 16 13 / 16

D 1 / 2 1 / 2 1 / 2 1 / 2 5 / 8 5 / 8 5 / 8 5 / 8

B 5 / 8 5 / 8 5 / 8 5 / 8 3 / 4 3 / 4 3 / 4 3 / 4

No. 15828

†15808 †15810 †15812 †15814 †15828 †15830 †15832 †15834

150 199 217 220 200 257 280 304

6 6 6 6 6 6 6 6

†RUS Listed 5 / 8 " Bolt has 12,400 Pound Rated Tensile Strength 3 / 4 " Bolt has 18,350 Pound Rated Tensile Strength

2 1 / 2

BOLTS, DOUBLE-ARMING EYE Bolts have a cone type point and are threaded to within 2" of the 1 1 / 2 " x 2" eye. Three Square Nuts. Drop-forged steel. Hot dip galvanized.

5 / 8 -Inch Diameter

Length Under Eye C (Inches)

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No. †19784 †19786 †19788 †19790 †19792

Inside Dim. A

Outside Dim. B

14 16 18 20 22

196 220 232 256 260

1 1 / 2 1 1 / 2 1 1 / 2 1 1 / 2 1 1 / 2

2 5 / 8 2 5 / 8 2 5 / 8 2 5 / 8 2 5 / 8

12,400 Pound Rated Tensile Strength †RUS Listed

BOLTS, DOUBLE-ARMING FULL THREAD

Bolts permit replacement ease in double arms and offer added flexibil- ity of use. Cone type point for easy starting and driving-out without damage to threads. Each bolt provided with four square nuts. Hot dip galvanized steel.

NOTE: For ALL sizes now available, see Supplemental Catalog Bulletin 5-53.24 through 5-53.28 dated December 2008.

Approx. Ship Wt. Lbs. Per 100 Pcs

Catalog No.

Length, Inches

Catalog No.

Length, Inches

1 / 2 -Inch Shank Diameter

8846

117

8848

125

3 / 4 -Inch Diameter

5 / 8 -Inch Diameter

†*8862 †*8864 †*8866 †*8868 †*8870 †*8872 †*8874 8876 8877 8878 8879

12 14 16 18 20 22 24 26 28 30 32

126 156 176 196 204 220 240 256 268 270 280

C2050140 C2050141

6 8 12 14 16 18 20 22 24 26

128 150 234 240 248 272 292 316 328 365

*8882 *8884 *8886 *8888 †*8890 †*8892 †*8894 8896 18,350 Pound Rated Tensile Strength

No. 8846

12,400 Pound Rated Tensile Strength *ANSI Standard †RUS Listed

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-7

BOLTS, MACHINE Are also called crossarm bolts or through bolts. Bolts have rolled threads and one square nut. Bolts six inches or longer have cone-type points. Hot dip galvanized. Approx. Ship Approx. Ship

NOTE: For ALL sizes now available, see Supplemental Catalog Bulletin 5-53.24 through 5-53.28 dated December 2008.

Dim. in Inches

Wt. Lbs. Per 100 Pcs.

Cat. No. 3 / 8 -Inch Diameter

Cat. No.

Bolt Length

Thread Length

Bolt Length

Thread Length

8604 860412

4 4 1 / 2

3 3

15 17.2

5 5 1 / 2

3 3

18.8 19.6

*8605 860512

4,250 Pound Rated Tensile Strength

No. 8810

1 / 2 -Inch Diameter

17.6 † *8708 †8709 †*8710 *8712 8714 7,800 Pound Rated Tensile Strength 5 / 8 -Inch Diameter 33 35 39 48

8 9 10 12 14

4 4 4 6 6

49 57 60 71 73

1 1 / 2 4 1 / 2

1 1 / 4

870112 *870412 *8705 †*8706 †8707

3 3 3 3

5 6 7

8805 †*8806 †8807 †*8808 †8809 †*8810 †*8812

5 6 7 8 9 10 12

3 3 4 4 4 6 6

60 69 75 78 84 99 112

†*8814 †*8816 †*8818 †*8820 †8822 †8824

14 16 18 20 22 24

6 6 6 6 6 6

126 134 149 164 176 194

No. 860512

12,400 Pound Rated Tensile Strength

3 / 4 -Inch Diameter

18 20 22 24 26

6 6 6 6 6

232 252 268 304 308

†*8908 †*8910 †*8912 †*8914 †*8916

8 10 12 14 16

4 6 6 6 6

126 154 166 188 225

†*8918 †8920 †8922 †8924 †8926

18,350 Pound Rated Tensile Strength 7 / 8 -Inch Diameter

† *C2050254 †*C2050256 †C2050258

14 18 22

6 6 6

284 352 425

316 390

†*C2050255 †C2050257

16 20

6 6

25,400 Pound Rated Tensile Strength

*ANSI Standard †RUS Listed

BOLTS, OVALEYE Bolts with 5 / 8 " and 3 / 4 " shanks have 1 1 / 2 " x 2" ovaleyes. Drop-forged, galvanized steel bolts have cone type points and rolled threads.

No. 29960

Approx. Ship Wt. Lbs. Per 100 Pcs.

Length Under Eye Inches

Thread Length Inches

Catalog No.

Catalog No. 1 / 2 -Inch Shank Diameter 7 / 16 " x 1 1 / 4 " x 1 5 / 8 " Ovaleye

100

*29939

*29943

7,800 Pound Rated Tensile Strength

†29956 †*29958 †*29959 †*29960 †*29962 †*29964 †29966 †29968 †29970 4 4 4 6 6 6 6 6 6 5/ 8 " Shank Dia — 9/ 16 x 11/ 2 " x 2" Ovaleye 100 104 113 122 144 146 168 208 240 6 8 9 10 12 14 16 18 20

" x 11/ 2 " x 2" Ovaleye

†29978 †29980 †29982 †29984 †29986 †29988 4 4 6 6 6 6 18,350 Pound Rated Tensile Strength *NEMA Standard † RUS Listed 3/ 4 " Shank Dia — 5/ 8 8 10 12 14 16 18

180 200 228 248 268 314

12,400 Pound Rated Tensile Strength

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-8

BOLTS, SCREW EYE Gimlet-point lag-screw thread. Drop-forged except 8777. Hot dip galvanized.

1 ⁄ 4 "

Dimensions in Inches

Approx. Ship Wt. Lbs. Per 100 Pieces

Catalog No.

Size of Eye

Length Under Eye

Type

Dia.

1 1 / 4 x 1 5 / 8 1 1 / 4 x 1 5 / 8 3 / 4

1 / 2 1 / 2 3 / 8

29930 C2050094 †8777

Ovaleye Ovaleye Hookeye

6 4

65 54 16

No. 29930 No. 8777

3 1 / 2

†Opening in Eye 1 / 4 ".

BOLTS, THIMBLEYE ® Contoured eye keeps guy strand from kinking, bending, or spreading. Drop-forged steel. Hot dip galvanized. Cone-type points. Eyes of angle bolts are offset 45 degrees. Approx. Ship Wt. Lbs. per 100 Pcs. Thread Length Inches Straight Bolt Catalog No. Approx. Ship Wt. Lbs. Per 100 Pcs. Thread Length Inches Angle Bolt Catalog No.

Size Inches 5 / 8 x 8 5 / 8 x 10 5 / 8 x 12 5 / 8 x 14 5 / 8 x 16 5 / 8 x 18

Angle Bolt DG4F8

Straight Bolt —

Size Inches 3 / 4 x 10 3 / 4 x 12 3 / 4 x 14

4 4 6 6 6 6

112 148 176 188 192 200

4 6 6

228 244 264

DG1F8 †*5510 †*5512 *5514 5516 DG1F18

†5110T †5112T 5114T

*5010 *5012 *5014 5016 —

†5612 5614

Dimensions in Inches B

A 5 / 8 3 / 4

C 9 / 16 11 / 16

D 11 / 16 13 / 16

R 1 / 4 9 / 32

E 1 1 / 2 1 5 / 8

18,350 Pound Rated Tensile Strength *NEMA Standard †RUS Listed

1 3 / 8 1 1 / 2

No. 5612

No. 5112T

12,400 Pound Rated Tensile Strength *ANSI †RUS Listed

No. 5112T

No. 5612

BOLTS, UPSET, DOUBLE Includes square nut, round washer, and cotter key on short end and Square nut and M-F locknut on long end. Used with spool insulators ANSI 53-2. Hot dip galvanized.

HEXAGONAL SECTION FORWRENCH HOLD

1 3 ⁄ 8 "

1 1 ⁄ 4 "

5 ⁄ 8 "

Dimensions in Inches

Approx. Ship Wt. Lbs. Per 100 Pieces

Catalog No.

A 8 9 10 12 14

L 13 3 / 4 14 3 / 4 15 3 / 4 17 3 / 4 19 3 / 4

B 6 6 6 6 6

1 1 ⁄ 2 "

4 1 ⁄ 4 "

†7826 †7828 †7830 7832 7834

166 162 168 186 204

12,400 Pound Rated Tensile Strength †RUS Listed

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-9

1 1 ⁄ 4 "

BOLTS, UPSET SINGLE Used in rural secondary construction. Has 5 / 8 " thread diameter. Used with spool insulators ANSI 53-2. Hot dip galvanized.

1 1 ⁄ 4 "

5 ⁄ 8 "

4 1 ⁄ 2 "

Dimensions in Inches

Approx. Ship Wt. Lbs. Per 100 Pieces

Shank Length Catalog No. †7741 †774112 7742 7743 7744 L 12 3 / 4 13 3 / 4 14 3 / 4 16 3 / 4 18 3 / 4 12,400 Pound Rated Tensile Strength †RUS listed A 8 9 10 12 14

B 4 4 4 6 6

138 144 170 186 196

1 1 / 16 " Hole

BRACES, CROSSARM, ALLEY ARM Used for side-arm construction. Furnished with lineman's steps. Hot dip galvanized.

No. 6979

Holes

Approx. Ship Wt. Lbs. Per 100 Pcs.

Pole Attach

Arm Attach 9 / 16

Catalog No.

Length Feet

Angle Size Inches

9 / 16 " Hole

9 / 16 9 / 16 11 / 16

*6979 †6984 T2030367

5 7 10

1300 1788 1780

1 3 / 4 x 1 3 / 4 x 3 / 16 1 3 / 4 x 1 3 / 4 x 3 / 16 2 x 2 x 1 / 4

11 / 16 11 / 16

*NEMA Standard †RUS listed

No. 6999

BRACES, SIDE ARM Used on three-phase medium-voltage lines, brace is placed on side op- posite odd conductor to support the unbalanced load. Can be used for either right or left support. Hot dip galvanized.

Dimensions in Inches Hole Dia.

Size of Angle E 1 3 / 4 x 1 3 / 4 x 3 / 16

Approx. Ship Wt. Lbs. Per 100 Pcs. 930

Catalog No. †6999

Pole C 11 / 16

Arm D 11 / 16

A 27

B 42

†RUS listed

BRACES, CROSSARM, "V" Furnished with 9 / 16 " holes for crossarm mounting. 11 / 16 " holes for pole mounting. The “1” series has a 9 / 16 " x 1" slot in place of the 9 / 16 " diam- eter crossarm mounting holes. Hot dip galvanized.

B A

Approx. Ship Wt. Lbs. Per 100 Pcs. 820

Dimensions in Inches

Catalog No. *6940 *6941 †*6942 †*6948 †*6953 †6955 69401 69421

Size of Angle 1 1 / 2 x 1 1 / 2 x 3 / 16 1 1 / 2 x 1 1 / 2 x 3 / 16 1 1 / 2 x 1 1 / 2 x 3 / 16 1 1 / 2 x 1 1 / 2 x 3 / 16 1 3 / 4 x 1 3 / 4 x 3 / 16 1 3 / 4 x 1 3 / 4 x 3 / 16 1 1 / 2 x 1 1 / 2 x 3 / 16 1 1 / 2 x 1 1 / 2 x 3 / 16

A 45 51 63 51 63 75 45 63

B 42 48 60 48 60 72 42 60

C 12 18 18 14 18 18 12 18

980 1100 920 1340 1600 820 1120

No. 6940

*NEMA Standard †RUS listed

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-10

BRACES, CROSSARM, FLAT

Have rounded ends and are punched at one end with a 9 / 16 " hole, with a 7 / 16 " hole at the other end. Holes punched 1-inch from brace end to center of hole. Hot dip galvanized.

7 / 32 " x 1 7 / 32 " Braces

1 / 4 " x 1 1 / 4 " Braces

Approx. Ship Wt. Lbs. Per 100 Pcs.

Approx. Ship. Wt. Lbs. Per 100 Pcs.

Catalog No.

"A"

Catalog No. 7126

"A"

7020 7026 *7028 *7030 *7032

18 24 26 28 30

140 185 200 215 225

24 26 28 30 32 34 36

230 240 255 275 295 315 335

†7128 7130 7132

C2030233 T2030459 T2060398

*NEMA Standard

†RUS listed

No. 7020

BRACKET, CORNER CONSTRUCTION

Used for small angles to deadend on pole. Has 1 1 / 2 " x 2" drop-forged eyes, 12" extension. Mounting eyes are at right angles to take-off eye.

1 1 / 2 " Open Eye

Dimensions in Inches

Catalog No. †5728 C2060480

Approx. Ship Wt. Lbs. Per 100 Pcs.

Steel Size 3 / 4 Rd. 5 / 8 Rd.

Mting. Distance 12 12

530 375

†RUS listed

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-11

BRACKETS, CUTOUT, ARRESTERS & POTHEAD

C2060193

These brackets offer awide variety of one, two or three unitmount- ing applications. Completely assembled brackets are available as well as individual parts for field adaptation. The one and two unit brackets can be mounted with the vertical member running either up or down the pole.

1 1 / 2 "

12 1 / 8 "

1 1 / 2 "

C2060189

Approx. Ship Wt. Lbs. Per 100 Pcs. 390

6 13 / 16 "

Catalog No. C2060189

30°

Description Pole bracket for mounting single unit of apparatus Cross strap for mounting two units of apparatus C2060189 and C2060190 C2060189 and C2060190 and lower strap for third unit (incl. grd. clamp)

LOWER STRAP FOR THIRD UNIT

8 1 / 2 "

C2060190

230

C2060192

C2060192 C2060193

630 790

8 1 / 2 "

C2060190

1 / 2 " x 2" bolts

BRACKETS, CUTOUT AND ARRESTER Hot dip galvanized, complete with bolts, nuts and washers. Crossarm brackets adjust to fit arms from 3" x 4" to 4" x 5".

1 / 2 " x 2" carriage bolt

Clearance Dimensions Crossarm to Mtg. Bolt

Catalog Number

Bracket Description

Wt. Per 100 lb.

2 9 / 16 " 2 5 / 8 " 5 1 / 4 " Pole to Mtg. Strap 5"

*C2060127 *C2060283 C2060280 C2060236

Crossarm Bracket NEMA Type A Crossarm Bracket NEMA Type B Crossarm Mounting Bracket Pole Mounting Bracket

250 284 375 400

3 / 8 " x 5" carriage bolts

Crossarm Brackets

4 1 / 4 "

*NEMA Standard

Pole Bracket

This “D” type bracket is used to mount cutouts and/or arresters directly to the pole. Three brackets may be used for three-phase application. Can be conveniently mounted or removed without removing bolts. Clean, quickmounting for single-phase application without crossarm or special pole bands. Galvanized 3 / 8 " x 2" steel, 7.25 or 12-inches of clearance to the face of the pole. Mounting holes accept the L portion of the NEMA cutout crossarm bracket. A grounding lug connector is provided (on C2090299 only), along with two 3 / 8 " x 1 1 / 2 " carriage bolts with nut, round washer and lock washer. BRACKET, CUTOUT AND ARRESTER

30°

10 3 / 8 "

7 3 / 8 "

3 1 / 2 "

7 / 16 " dia.

grounding lug

3 / 8 "

11 / 16 " 2 slots

A (inches)

Approx. Ship Wt. Lbs. Per 100 Pcs.

Description

Catalog No.

Pole bracket for Dim. A is 12-in. mounting single unit of apparatus with ground lug Pole bracket for Dim. A is 7.25-in. mounting single unit of apparatus without ground lug

C2060299

767

C2060547

7.25

675

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-12

BRACKETS, EXTENSION Where obstructions are to be overcome and where proper clearances are required, this bracket is fastened to the pole for mounting secondary racks. Made of hot-galvanized 9-gauge steel, it is equipped with a 5 / 8 " x 2" carriage bolt. Curved back is 3" wide.

Dimensions in Inches

Approx. Ship Wt. Lbs. Per 100 Pcs.

No. 2355

Mounting Holes

Catalog No. *PS2355 *2357

Side 9 / 16 9 / 16

Extension 6 9

Center 11 / 16 11 / 16

308 405

*NEMA Standard

BRACKET, NEUTRAL OFFSET Designed to support the neutral wire well away from the pole. Used primarily on rural open wire construction where long spans are common and additional clearance or climbing space is required. Full-threaded 25" rod; 5 / 8 " pin accepts ANSI 53-2 spool insulator.

No. C2060004

Pole Mting. Hole Dia. 1 / 2 "

Approx. Ship Wt. Lbs. Per 100 Pcs. 800

Catalog No. †C2060004

Arm Length 15"

Rod Diameter 5 / 8 "

†RUS listed

BRACKET, NEUTRAL WIRE Used where a neutral wire is used as one of a 3-phase circuit. Has 11 / 16 " mounting slots. Non-insulating. Hot dip galvanized steel.

Approx. Ship Wt. Lbs. Per 100 Pieces 124

Catalog No. 3470

Wire Size 1 / 2 or under

Length Pole Bearing Surface 2 1 / 2

No. 3470

BRACKET, POLE TOP This bracket can be used with two pole-top pins to give additional clear- ance fromthe pole. It ismounted to the polewith 5 / 8 " double arming bolts, extending the spread between insulators by 4" in addition to the pole diameter. The bottom slot is 11 / 16 " x 1 1 / 4 " for easy adjustment. Bracket pipe spacers may be required (See page 5-47).

Approx. Ship Wt. Lbs. Per 100 Pcs. 380

Dimensions in Inches

Catalog No. †2157

Hole Dia. 11 / 16 "

Overall Height 10 1 / 2

Hole Spacing 8

Steel Size 1 / 4 " x 3"

†RUS listed

No. 2157

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-13

BRACKETS, POST INSULATOR Curved base

3 1 / 2 " R

11 / 16 " Dia. hole L 3 / 8 "

This bracket can be used for mounting distribution post-type insulators from 15 kV to 34.5 kV on the side of the pole. The base has a pole-shape back for convenient installation. Brackets can be placed in a phase-over- phase arrangement or can be mounted on opposite sides of the pole for "armless" construction.

4 1 / 2 "

10"

Insulators not included.

load table

11 / 16 " x 1 1 / 4 " slot

C2060009

Approx. Ship Wt. Lbs. Per 100 Pcs.

Dimensions In Inches

Angle A

Catalog Number

L 9 1 / 2

D 13 / 16 13 / 16 13 / 16

W 4 4 4

15° 15° 15°

1220 1669 2066

*C2060009 †*C2060010 C2060011

12 15

*These brackets have 13 / 16 " stringing block holes. †RUS listed

5 1 / 4 "

11 / 16 " x 1 3 / 8 " slot 8 3 / 4 "

11 / 16 " x 1 3 / 8 " slot

13 / 16 " hole

30°

BRACKETS, POST INSULATOR Side Mounted

30°

13 / 16 " hole

4 1 / 2 "

8 1 / 2 "

The bracket is formed of high-quality 3 / 8 " x 2 1 / 2 " bar steel and hot dip galvanized. It can be utilized to mount distribution post insulators from 15 kV to 34.5 kV.

13 / 16 " x 15 / 16 " slot

11 / 16 " hole

Pole Mounting Bolts Required

Insulator Stud Bolts Required

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog Number

C2060162 C2060209

11 / 16 " Hole 16919

13 / 16 " Hole †*C2060209 C2060162

Two 5 / 8 " Two 5 / 8 "

3 / 4 " 3 / 4 "

650 440

*This bracket is designed to facilitate a stringing block. †RUS listed

BRACKETS, POST INSULATOR Uni-Brackets

18 17 / 32 "

8 1 / 4 "

13 / 16 " Hole

11 / 16 " Holes

60° 9 1 / 2 "

ChanceUni-Brackets area clean-appearing, low-costmethodofmounting three post-type insulators atop a pole completely eliminating the cros- sarm. The brackets can be installed on the pole in less than five minutes, requiring only two 3 / 4 " bolts for attachment. Uni-Bracketsfit poles having a pole-top diameter from 6" to 8 1 / 2 ". Slot on top is 11 / 16 " x 2 1 / 4 ". No. 9183 brackets can be adapted to a variety of distribution construc- tion using post-type insulators from 15 through 34.5 kV.

13 / 16 " x 1 1 / 4 " Hole

3 / 8 " x 2 1 / 2 " Stock

Catalog Number †9183

Insulator Stud Bolts Required 5 / 8 "

Approx. Ship Wt. Lbs. Per 100 Pcs. 2100

No. 9183

†Includes both sections of bracket

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-14

BRACKET, SERVICE DEADEND Attaches to 1 1 / 4 " through 3" diameter service masts. Front strap is rounded to prevent damage to bail of the service clamp. Square hole at end of the front slot captures the carriage bolt head during instal- lation and prevents slippage after installation. Hot dip galvanized.

C2060169

Approx. Ship Wt. Lbs. Per 100 Pcs. 102

Catalog No. C2060169

Adjustment 1 1 / 4 " —3"

No. 8205

BRACKETS, TELEPHONE HOUSE Used where the pole lead attaches to the building at an angle or to carry leads around the corner of a building. Used with porcelain spool insulator and 8604 bolt (page 5-7) which are not included. Hot dip galvanized.

Dimensions in Inches

Approx. Ship Wt. Lbs. Per 100 Pcs. 82

Catalog No. 8205

Mtg. Holes 9 / 32

Ins. Holes 13 / 32

Steel Size 1 / 2 x 3 / 16

A 4 3 / 4

B 2 7 / 8

C 2 5 / 8

These lightweight, easy-to-handle aluminum transformer mounting brackets are designed for 3 KVA thru 250 KVA trans- formers. Their bolted, rugged construction has pre-drilled holes for mounting. The convenient key-hole has a jump-proof lip for a secure mounting. Units are designed to accommodate mounting one, two or three transformers and will fit NEMA- A, B and C lugs. A func- tional grounding lug is built-in on the back. ALUMINUM RACK FRAME TYPE BRACKETS, TRANSFORMER MOUNTING

NO LONGER AVAILABLE.

PLEASE SEE CATALOG SECTION 5B FOR UPDATED VERSIONS.

Approx. Ship Wt. Lbs.

Catalog No. C2128007 C2128007A C2128007B C2128007AB

Description No transformer mtg. bolts 5 / 8 x 1 3 / 4 -in. transf. mtg. bolts 3 / 4 x 2 in. transf. mtg. bolts 5 / 8 & 3 / 4 -in. transf. mtg. bolts

36 36 36 36

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

BRACKETS, TRANSFORMER MOUNTING RACK-FRAME TYPE

5-15

For mounting 3 KVA to 500 KVA transformers

The rack-frame type bracket may be mounted to the pole with either thru-bolts or bands and is available in three sizes. Manufactured of high-strength steel, galvanized perASTM A-153, with bolted construction using a minimum number of parts and completely factory assembled. Transformers can be mounted to these sturdy brackets while on the ground, with the hardware that is included with each bracket, for a convenient, balanced one-lift maneuver to the pole top,—pre-drilled holes accept lifting eyes. The "T" prefix in the catalog number indicates the unit has a built-in integral lifting eye for an easy one-point lift maneuver. Banded style has a reinforced bolting surface. (Fig. A)

C2120141

Thru-bolt style has jump-proof lip.(Fig. B) Virtually all 167 KVA to 333 KVA

trans-

formers can be installed on the C2120143 and T2120224 and C2120144 and T2120225 brackets. Check manu- facturers dimensions for coolingfins. Outsidedimen- sions are shown in the table.

C2120146

NOTE: Order thru-bolts and lag screws separately. Thru-bolts up to 3 / 4 " and lag screws up to 5 / 8 ".

C2120143

Dimensions A B

Catalog Number (1)

Transformer Lug Dimension

Pole Diameter

Wt. Each

Strength

Type Pole Mounting

Tested to 2000 lb., per transformer position, simultaneous loading Tested to 5000 lb., per transformer position simultaneous loading Tested to 5000 lb., per transformer position simultaneous loading

One BAND & 2 lag screws or One BAND & 1 thru-bolt 2 THRU-BOLTS or 1 THRU-BOLT & 2 lag screws

C2120141

3 to 50 KVA

6 1 / 2 "

31"

55 lb.

6 1 / 2 - 11 1 / 2 "

NEMA A LUGS

T2120222

†C2120142

53 lb.

N/A

T2120223

3 to 333 KVA**

** 2 Pole BANDS

†C2120143

21 1 / 2 "

4 1 / 2 "

75 lb.

NEMA B LUGS

7 - 12"

NEMA A LUGS

T2120224

2 THRU-BOLTS

†C2120144

4 3 / 4 "

25"

61 lb.

N/A

T2120225

75 to 500 KVA

2 Pole BANDS

C2120145

102 lb

7 - 12"

37 1 / 2 "

9 1 /2 "

NEMA C LUGS

T2120226

NEMA B LUGS

2 THRU-BOLTS

†C2120146

83 lb.

N/A

T2120227

2 THRU-BOLTS

*C2120147

85 lb.

N/A

T2120228

†RUS listed **If cooling fins fit, see dimensions A and B. *Can also mount NEMAA lugs.

(1) Note: "T" prefix indicates unit has lifting eye. #Order Adapter plate for type C lugs separately, see page 5-16.

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-16

TRANSFORMER BRACKETS

Two Transformer Brackets One piece construction. Drilled for banding or through bolting to pole. Has transformer mounting bolts and ground bolt assembly. Brackets have 12" and 24" spacing for mixed bank application. Tested to 4,000 lbs. per transformer position. Bracket C2120001 is mounted with two bolts or one bolt and lag screw.

Ship Wt. Lbs. Each 30

Catalog No. *C2120001

Description

Transformer KVA Rating 75 KVA and 100 KVA

Through Bolt Type

*RUS listed

Direct Pole Mount Brackets Plates canbeused on regular transformer brackets. One of each required to mount transformer.

C2120001

Catalog No. C2110015

Ship Wt. Lbs. Each 12.25

Description Top plate with jump-proof lips, less bolts Bottom plate with open end slot, less bolts

No. C2110015 Top Plate No. C2110017 Bottom Plate

11.5

C2110017

ADAPTERS FOR USEWITH TRANSFORMER BRACKET

6 5 ⁄ 16 "

4 3 ⁄ 16 "

13 ⁄ 16 "

3" 11 ⁄ 16 "

3 ⁄ 8 "

4 3 ⁄ 16 "

14"

16"

C2110012 Horizontal Adapter Plate

C2110015 Horizontal Adapter Plate

Two bracket assemblies (5250 or 5350), can be used for mounting 167 KVA to 500 KVA by adding No. C2110012 horizontal adapter plates. Plates should be usedwith two brackets to make a complete assembly. Two plates are required for each transformer. Each plate is furnished with one 5 / 8 " x 1 3 / 4 " machine bolt.

C2110009 Vertical Adapter Plate

One plate is required for each transformer. Plates furnishedwith three 5 / 8 " x 1 3 / 4 " machine bolts.

1 ⁄ 2 "

3 3 ⁄ 16 "

4 1 ⁄ 2 "

Catalog No. C2110009

Approx. Ship Wt. Each Lbs. 5.4

13 ⁄ 16 "

16"

Description Adapter Plate for Mtg. Trans. on Single Segment, w/machine bolts. Adapter Plate for Mtg. Trans. with Type C lug spacing, w/machine bolts. Plate with 3" offset, w/machine bolts. Identical to C2110017 except open end mounting slot less jump-proof lips Top plate with jump-proof lips Includes C2110016, C2110017 and four 5 / 8 " x 1 3 / 4 " bolts and nuts

C2110017 Horizontal Adapter Plate

C2110012

9.2

Horizontal adapter platesC2110015, C2110016and C2110017, may be used in lieu of No. C2110012 plate where more extension from bracket is desired when mounting 167 KVA to 500 KVA transformers with Type “C” lug spacing. Two plates required per transformer. Furnished with two 5 / 8 " x 1 3 / 4 " bolts each as noted.

C2110015 C2110016

10.5

10.4 10.3 22

C2110017 C2110058

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-17

BRACKETS, TRANSFORMER MOUNTING BANDED CLUSTER MOUNTS Fits most 3 KVA to 500 KVA transformers

to mounting bracket, ground clamp and installation instructions are included. The Banded Cluster Mounts may be ordered in pack- ages (recommended), or by components (not recom- mended). Brackets provide 6 3 / 8 " of pole clearance. Heavy Duty Bracket

These easy-to-install cluster mounts have a curved back to fit round, tapered poles from 6" (15.2 cm) to 10 1 / 2 " (26.7 cm) in diameter. Manufactured of high-strength steel, galvanized per ASTMA-153. Standard duty mounts have one set of four 6" long clamping bolts. Heavy-duty mounts have two sets of bolts (see sketch). Lag screws can be used to position the mounting bracket be- fore tightening clamping bolts. Support rating, however, does not depend on the use of lag screws. All banding hardware for mounting to the pole, hardware to attach transformer

HD350 HD315

Heavy Duty Bracket

NEMA A LUGS

SINGLE PHASE— 3 thru 50 KVA Transformers

THREE PHASE— 15 and 30 KVA Transformers

No. 115

No. 215

No. 315

Catalog Number 115

Weight Lb. 27.5

Catalog Number †215

Weight Lb. 39

Catalog Number †315

Weight Lb. 50

Catalog Number HD315

Weight Lb. 65

Consists of 1 #5150

Consists of 1 #5250

Consists of 1 #5350

Consists of 1 #HD5350

Transformer Bracket and 1 #C2110009 Vertical Bracket

Transformer Bracket and 2 #C2110009 Vertical Bracket

Transformer Bracket and 3 #C2110009 Vertical Bracket

†RUS listed

NEMA B LUGS

SINGLE PHASE— 75, 100 and 167 KVA Transformers

THREE PHASE— 45 and 75 KVA Transformers Will also mount Type A lugs, 12" spacing

No. PS150

No. PS250

No. 350

Catalog Number PS150 Consists of 2 #5150 Transformer Brackets

Weight Lb. 43

Catalog Number †PS250 Consists of 2 #5250 Transformer Brackets

Weight Lb. 64

Catalog Number †350 Consists of 2 #5350 Transformer Brackets

Weight Lb. 72

Catalog Number HD350

Weight Lb. 86

Consists of 2 #HD5350 Transformer Brackets

†RUS listed

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-18

BRACKETS, TRANSFORMER MOUNTING

NEMA C LUGS

SINGLE PHASE—250, 333 and 500 KVA Transformers THREE PHASE— 112 1 / 2

, 150, 225 and 300 KVA Transformers

No. 3100

Weight Lb.

Catalog Number †3100 Consists of 2 #5350

Catalog Number HD3100

129.6

137.6

Consists of 2 #HD5350

Transformer Brackets and 6 #C2110012 Horizontal Brackets

†RUS listed

Tailor your own mounting assemblies with brackets and adapters on page 5-16.

Heavy Duty Bracket HD3100

Ground Lug

No. 5150 Bracket

No. 5250 Bracket

No. 5350 Bracket

9 / 16 "

C2030187 Cluster Mount Segment 2.5 lb. 1 / 4 " stock

C2110019 or C2110021 Transformer Mounting Bracket 9 lb. 1 / 4 " stock

1 3 / 16 "

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-19

BRACKETS, TRANSFORMER, SECONDARY LEAD The Chance Secondary Lead Transformer Bracket is a device that serves as a support for secondary lead wires. Made to clamp over the rolled edge at the bottom of the transformer, it fits all popular distribution transformers with steel tank. Clamp and bolt are hot dip galvanized steel. Bolt end has a plastic cap to prevent scratching the outer surface of the transformer. Furnished as a bracket or with insulator assembled.

Dimensions in Inches

Approx. Ship Wt. Lbs. Per 100 Pcs. 152

Steel Size of Clamp 5 / 16 x 1 1 / 4

Size of Insulator Bolt 1 / 2 x 5

Catalog No. †9113S *

Description With Non-ANSI 2 1 / 4 x 2 1 / 8 "

Spool Insulator Ins. Assembled With ANSI 53-2 Ins. Assembled

†9114S *

5 / 16 x 1 1 / 4

256

1 / 2 x 6

No. 9113S

† RUS listed * "S" Indicates gray glaze insulators

CLAMPS, BONDING Bonding Clamps make a dependable mechanical and electrical pressure contact between guy strand and anchor rod, when the guy is part of the grounding system. UsedonThimbleye andAngle-Thimbleye bolts tokeep hardware-to-guy contacts tight. Also used to prevent excessive wear on guy strands and protect galvanizing. Maintains electrical continuity.

For Power Installed Screw Anchors

Catalog No.

Rod Type and Size in Inches Thimbleye, 1 / 2 & 5 / 8 Thimbleye, 3 / 4 & 1 Twineye, 5 / 8, 3 / 4 & 1 Tripleye, 5 / 8 , 3 / 4 & 1 Rod Type and Size in Inches Thimbleye, 1 / 2 & 5 / 8 Twineye, 5 / 8, 3 / 4 & 1 Tripleye, 3 / 4 & 1

Approx. Ship Wt. Lbs. Per 100 Pieces

†G5067 †G5068 G5069 C2030148

22 36 38 41

Expanding Anchors & Rock Anchors

Approx. Ship Wt. Lbs. Per 100 Pieces 6.5

Catalog No. †G5060

13 21

◆ †G5061 ◆ †G5063

For No-Wrench Screw Anchors

Catalog No. G5065 G5063

Rod Type and Size in Inches Thimbleye, 3 / 4 & 1 Tripleye, 3 / 4 & 1

Approx. Ship Wt. Lbs. Per 100 Pieces

15 21

† RUS listed ◆ These can be used with SS (square Shaft) and RR (round rod) anchors.

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-20

CLAMP, GROUND

Connection is soldered to the cable sheath and mechanically clamped to the messenger wire. The bolt can be removed so that the clamp can be dropped over the messenger. Hot dip galvanized.

Approx. Ship Wt. Lbs. Per 100 Pieces 61

Catalog No. 7956

Steel Size 3 / 16 x 1 3 / 4

Length 1 3 / 4

Bolt Size 1 / 2 x 1 3 / 4

No. 7956

CLAMP, GROUND WIRE

Ground Wire Clamp is used to attach ground or static wires to bayonets. No 5450 is 1 / 2 " J-Bolt which fits into two holes at top of bayonet (as seen on Page 5-5).

No. 5450

"J" Type

Approx. Ship Wt. Lbs. Per 100 Pieces 39

Catalog No. 5450

Bayonet Hole Spacing 15 / 16 "

CLAMP, GUY Parallel grooves trap strand tightly without marring. Plate halves align evenly for easy application. Each bolt has a shoulder to prevent turning while tightening. Hot dip galvanized.

No. 6461

5 / 8 " Clamp Bolts

Ship Wt. Lbs. Per 100 Pcs.

Dimensions in Inches

Catalog No. 6460 †*6461 6462

No. of Bolts

Accepts Strand Size 3 / 8 thru 5/ 8 5 / 16 thru 1 / 2 5 / 16 thru 1 / 2

Length 6 6 4

Width 2 1 / 8

3 3 2

390 252 178

1 21 / 32 1 21 / 32

1 / 2 " Clamp Bolts

Ship Wt. Lbs. Per 100 Pcs.

Dimensions in Inches

Catalog No. 6448 6449 †*6450

No. of Bolts

Accepts Strand Size 1 / 4 thru 7 / 16 1 / 4 thru 7 / 16 1 / 4 thru 7 / 16

Length 3 3 / 8

Width 1 9 / 16 1 9 / 16 1 9 / 16

2 3 3

132 162 228

4 6

†RUS listed *NEMA Standard

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-21

CLAMPS, GUY OFFSET This two-bolt guy clamp with curved clamping member provides a more positive hold on the guy strand. Available with 1 / 2 " or 5 / 8 " bolts. Hot dip galvanized.

Approx.Ship Wt. Lbs. Per 100 Pcs.

Dimensions in Inches

Catalog No.

Bolt Dia.

No. 6409

Length 3 1 / 4

Width 1 1 / 2 1 5 / 8

Strand Size 3 / 16 thru 5 / 16 5 / 16 thru 1 / 2

†6409 †6410

135 172

1 / 2 5 / 8

†RUS listed

CLAMPS, LASHING WIRE, TYPE E Clamp is fitted with a special clamp bolt formed with a shoulder to pre- vent turning while tightening. Both ends of the 1 / 4 " bolt are peened to prevent loss of nuts during shipment or handling. Hot dip galvanized.

Approx. Ship Wt. Lbs. Per 100 Pcs. 17

Dimensions in Inches

Catalog No. †9000

Strand Size 1 / 4 thru 7 / 16

Length 1

Width 1

No. 9000

†RUS listed

CLAMPS, SUSPENSION Clamps are used with through bolts to support cable at poles. Through bolt also serves as clamping member. One or more nuts and/or washers are used between the pole and clamp for required spacing. No. 7901 is used on very light cables. This one bolt clamp consists of the two clamping members only. Nos. 7902L and 7902R are used at corners and angles. Nos. 7903 and 7904 are used on straight runs.

Approx. Ship Wt. Lbs.

Dimensions in Inches

Catalog

Accommo- dates

Center Hole Dia. 11 / 16

Per 100 Pcs. 75

Type 1-Bolt Straight Susp 3-Bolt Angle Susp. 3-Bolt Angle Susp 3-Bolt Straight Susp. 3-Bolt Straight Susp. 3-Bolt Straight Susp.

Length 2 1 / 2

Number 7901

No. 7902R

Strand Size 1 / 4 thru 7 / 16

232

11 / 16

7902L

1 / 4 thru 7 / 16

232

13 / 16

7902R

1 / 4 thru 7 / 16

178

5 5 / 8

11 / 16

7903

1 / 4 thru 7 / 16

177

5 5 / 8

11 / 16

*7903L

1 / 4 thru 7 / 16

212

5 5 / 8

13 / 16

7904

1 / 4 thru 7 / 16

*Flat Keeper Plate

No. 7903L

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-22

CLEVIS, DEADEND There is no need for a cotter pin because the lip on the clevis locks the pin. An elongated slot in the upper arm lets the pin float into position. Steel parts are hot dip galvanized. Wet-process spool insulator is gray Sky-Glaze ® color. Shipped unassembled.

1 3 / 4 "

Approx. Ship Wt. Lbs. Per 100 Pcs. 41

Catalog No. H14

Description

2 3 / 8 "

Clevis, with Sq. Hole for 3 / 8 " Carriage Bolts and pin only (insulator not included)

No. H14

CLEVIS DEADENDING Used for attaching deadend insulators and guys with extension links (Page 5-32). Clevises have 5 / 8 " cotter bolts, except No. 456 which has a 3 / 4 " machine bolt. Hot dip galvanized.

Mtg. Hole Diameter 13 / 16 Throat Clearance 5 / 8 Dimensions in Inches

Approx. Ship Wt. Lbs. Per 100 Pcs. 98

Catalog No. 455

Steel Size 3 / 16 x 1 1 / 2

Extension 3 3 / 4

No. 455

CLEVISES, INSULATED (Insulators Not Included)

NEMA 53-2 PORCELAIN SPOOL INSULATOR

NEMA 53-4 PORCELAIN SPOOL INSULATOR

NEMA 53-2 PORCELAIN SPOOL INSULATOR

4 1 / 4 "

11 / 16 " SQUARE HOLE

11 / 16 " x 7 / 8 " OVAL HOLE

11 / 16 " x 25 / 32 " OVAL HOLE

3 1 / 2 "

3 1 / 4 "

1 1 / 2 " x 1 / 2 " x 1 / 2 " STEEL CHANNEL

1 x 1 / 2 " x 1 / 8 " STEEL CHANNEL

1 1 / 2 " x 1 / 2 " x 1 / 8 " STEEL CHANNEL

5 / 8 " COTTER BOLT

NEMA 53-3 PORCELAIN SPOOL INSULATOR No. *468 — Wt. per 100 pcs. 132 lb. 5"

No. 469 — Wt. per 100 pcs. 166 lb.

No. *461 — Wt. per 100 pcs. 158 lb.

NEMA 53-1 PORCELAIN SPOOL INSULATOR

C9091831 PORCELAIN SPOOL INSULATOR

4 1 / 16 "

2 3 / 4 "

11 / 16 "x 3 / 4 " OVAL HOLE

11 / 16 " x 3 / 4 " OVAL HOLE

11 / 16 " DIA. HOLE

2 3 / 8 "

3 5 / 16 "

1 / 2 " COTTER BOLT

3 / 16 " x 1 1 / 2 " STEEL

3 / 8 " COTTER BOLT

1 / 4 " x 1 1 / 2 " STEEL

5 / 8 " COTTER BOLT

3 / 16 " x 1 1 / 2 " STEEL

No. *0341 — Wt. per 100 pcs. 112 lb. RUS Listed

No. PS7820 — Wt. per 100 pcs. 90 lb.

No. *0340 — Wt. per 100 pcs. 144 lb.

*NEMA Standard

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

5-23

CLEVISES, INSULATED (Less Insulators)

NEMA 53-2 PORCELAIN SPOOL INSULATOR

NEMA 53-4 PORCELAIN SPOOL INSULATOR

4 1 / 2 "

11 / 16 " x 1 1 / 8 " SLOT HOLE

3 1 / 4 "

11 / 16 " DIA. HOLE

3 3 / 8 "

3 1 / 4 "

3 / 16 " x3" STEEL

5 / 8 " COTTER BOLT

3 / 16 " x 1 1 / 2 " STEEL

3 1 / 2 " BACK RADIUS

1 / 4 " x 1 1 / 2 " STEEL

5 / 8 " COTTER BOLT

No. *0337 — Wt. per 100 pcs. 240 lb. No. 0338 Clevis is identical to No. 0337 except length from back of clevis to cotter bolt is 3" instead of 4" and weight is 204 lb.

No. 0352 — Wt. per 100 pcs. 152 lb. RUS listed

No. *0322 — Wt. per 100 pcs. 186 lb.

NEMA 53-5 WET PROCESS PORCELAIN SPOOL INSULATOR

NEMA 53-4 PORCELAIN SPOOL INSULATOR

NEMA 53-2 PORCELAIN SPOOL

9 / 16 " DIA. 2 HOLES

11 / 16 " x 3 / 4 " SLOT HOLE

11 / 16 " x 3 / 4 " OVAL HOLE

3 1 / 4 "

4 1 / 4 "

5 / 8 " COTTER BOLT

3 / 16 " x4 " STEEL

5 / 8 " COTTER BOLT

1 / 4 " x1 1 / 2 " STEEL

5 / 8 " COTTER BOLT

No. *0327 — Wt. per 100 pcs. 276 lb. RUS listed 2 3 / 8 " BACK RADIUS

No. *0344 — Wt. per 100 pcs. 272 lb.

No. *C2070024 — Wt. per 100 pcs. 184 lb.

* NEMA Standard

CLEVISES, INSULATED (Less Insulators)

NEMA 53-2 INSULATOR No. C2070072

USE NEMA 53-3 INSULATOR No. C2070116

Sagger Bracket – Less Insulator Sagger Bracket – Less Insulator Crossarm Mounting Bracket For attachment over crossarmwith a 1 / 2 " carriage bolt installed verti- cally through the arm, or a 3 / 8 " lag screw. 140 240 C2070072 C2070116 Sagger Bracket Doubledutybracketmaybeused to support conductor during stringing operations and then may be rotated upright to become a permanent clevis. Catalog Number C2070072 has same overall dimensions as C2070024 clevis. Description Approx. Ship Wt. Lbs. Per 100 Pcs. Catalog No.

No. 8795

Catalog No. 8795

Approx. Ship Wt. Lbs. Per 100 Pcs. 192

Clevis – less insulator Description

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 pole line hardware Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52

Made with FlippingBook HTML5