4 ft. x 100 ft. fence starter kit. This kit comes with everything needed to create up to a 96 foot enclosure (example: 20-ft. x 28-ft.) with 4 braced corners and a 4-ft. wide gate. This kit can be extended in 100 ft. increments by adding 100 ft. fence line kits. Additional end and corner kits can also be added to create a custom enclosure.

USAGE: This fence can serve as a deer fence, dog fence, garden fence, or pool code fence.*
*check your local municipality regulations for pool code fencing.

FEATURES:

• Reverse Sleeve Installation: Our exclusive reverse sleeve method makes installing posts easy. The reverse sleeve is a hollow, heavy gauge, galvanized metal pipe 5-ft to 6-ft in length that penetrates the ground with relative ease. A hand held post driver or an automatic gas powered driver is used to drive the sleeve about 3 feet into the ground. Once the reverse sleeve is in the ground, a bottom brace band is fastened to the reverse sleeve at ground level. Then a black deer fence post is slid on top of the reverse sleeve. The posts will stay at a consistent height along your fence line.

• Interlocking brace pipe system: All of the corner, end and gate posts include a superior bracing system, exclusive by the Benner Deer Fence Co. Each brace pipe is secured to the top of every corner, end and gate post. The lower end is fastened to the bottom of the next line post. This prevents movement of the braced post and lengthens the life of the fence system. The immovable post also provides a great termination point for cables and fence because the post is secure and will not shift when tension is applied.

• 2 Cable Support System: Our 2-cable support system consists of a top and
  bottom cable. The cables stretch the fence vertically while also supporting it horizontally. This keeps the fence taught so it doesn’t bend or sag, providing a clean, formal appearance.

  
  KIT INCLUDES:

• 1 - Welded Wire Pool Code Deer Fence: 14-Gauge, 1.5-inch x 4-inch (4 ft. x 100 ft. roll)

• 1- Access Gate System: 4 ft. x 4 ft. gate with all hardware, posts and bracing

• 9- Line Post Kits: 16 gauge x 1-5/8” posts with 5 foot reverse sleeve and hardware for 2 cable support system

• 4- Corner Kit Systems: ss20 x 1-5/8” posts with 6 foot reverse sleeve and hardware for 2 cable support system. Each corner kit includes 2, 8-ft. corner brace pipes and hardware.

• 1- Top Cable: 11 gauge nylon tension cable, 333 ft. (extra cable included for additional tension that may be needed)

• 1- Bottom Cable: 8 gauge steel core nylon coated tension cable, 100 ft.

• 5-Medium Gripples: secures 11 gauge cable

• 5-Large Gripples: secures 8 gauge cable

• 1- Cable Ties: heavy duty 14-inch UV stabilized, 100 ct.

• 14- Ground Stakes: 18” rebar

• 1- Hog Ring Gun: Wematic, 3/4”

• 1- Hog Ring Clips: 3/4,” 2500 ct.

SHIPPING:
Please allow 4-6 weeks for delivery. This item requires freight shipping. Someone must be present to sign for the shipment. The signee will also be responsible for unloading the shipment from the freight truck. The kit will packed in small packages that one or two people will be able to hand unload.